- Tuotenumero:
- RX 9360.805
- Rakenne
- elektronisella varokkeen valvonnalla (ESÜ)
- Hyödyt
- Sulakkeiden turvallinen liitäntä (ilman sulakekantaa)
- Napsautettava asennus ja yksinkertainen säätö virtakiskon paksuudelle 5/10 mm
- Optinen LED-varokevalvonta
- Jännitetestaus erillisen aukon kautta
- Huoltovapaa vetojousiliitäntä 16 mm²:iin saakka
- Complete contact hazard protection without any additional accessories (such as screw caps)
- Materiaali
- Polyamidi (PA 6)
Palo-ominaisuudet normin UL 94-V0 mukaiset - Väri
- RAL 35745
RAL 9005 - Toimitus
- 4 bus-mounting fuse bases
12 reducers for D 01 fuses - Johtimien lähtö
- alas
- Napojen määrä
- 3-nap.
- Sopii virtakiskojärjestelmille
- RiLineX
- RiLine60
- Mitat
- Leveys: 36 mm
Korkeus: 263 mm
Syvyys: 123,5 mm - Liitäntä pyöröjohtimille, hienojohtimet ja päätehylsy
- 1,5 ‐ 16 mm²
- Liitäntä pyöröjohtimille, hienojohtimet ja päätehylsy AWG
- AWG 16 ‐ AWG 6
- Pyöröjohdinten liitäntä, monijohtoinen
- 1,5 ‐ 16 mm²
- Pyöröjohdinten liitäntä, monijohtoinen AWG
- AWG 16 ‐ AWG 6
- Sopii virtakiskoille
- Korkeus: 5, 10 mm
- Sopii virtakiskoille
- 15 x 5/10 mm
- 20 x 5/10 mm
- 30 x 5/10 mm
- nimellisjännitteelle
- 400 V AC
- Ylijänniteluokitus
- 4
- Kontaminaatioaste
- 3
- Normit
- IEC/DIN EN 60 947-3
- Rated insulation voltage
- 1 000 V
- Power dissipation (max.)
- 5,5 W
- Kotelointiluokka IP IEC 60 529 mukaan
- IP 2XB
- Operation humidity max
- 90 %
- Käyttölämpötila-alue
- -5 °C...55 °C
- Varastointilämpötila-alue
- -25 °C...75 °C
- Ilmankosteus (ei kondensoitumista)
- 10...90 %
- Utilisation category
- AC-21B (400 V/100 A)
- Pakkausyksikkö
- 4 kpl
- Nettopaino
- 1,796 kg
- Bruttopaino
- 1,8 kg
- Kuparimäärä (kg/kappale)
- 0,07
- Tullitariffinimike
- 85369095
- ETIM 9
- EC001644
- Tuotekuvaus
- RX Bus-mounting fuse base 63 A, 3-pole, D02-E18, with LED and fuse monitoring, W: 36 mm
Ratsastajavaroke-elementit
Tuotenumero: RX 9360.805
Bus-mounting fuse base for RiLineX and 60 mm busbar systems. For slow fuse D01 (with gauge ring) and D02 (E18). With electronic and optical LED fuse monitoring via alarm contacts. For reliable fuse contacting, the device has fuse holders instead of screw caps which are lockable the open state and sealable in the closed state. A spring terminal block up to 16 mm² at angle of 45° enables easier conductor connection. The device is suitable for tool-free snap-on mounting and has semi-automatic rail adjustment for 5 and 10 mm.