Divider panel for TS

Artikl broj: TS 8609.040

For shielding individual enclosure cells. Thanks to the symmetry of the frame system, the divider panel can also be used at the rear.

Pogledajte ovu stranicu u PDF-u
Artikl broj:
TS 8609.040
Product description
For shielding individual enclosure cells. All-round, double fold for stability and to hold the seal. Thanks to the symmetry of the enclosure frame, divider panels may also be fitted at the rear, dimensions permitting.
Applications
Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted.
Material
Sheet steel, 1.5 mm
Surface finish
Zinc-plated
Supply includes
Assembly parts
To fit
Enclosure type: TS 8
Height: = 2,000 mm
Depth: = 400 mm
Installation options
For mounting on the outer mounting level
This leaves the inner level free for further population
Assembly instruction
The divider panel may also be fitted at the rear. This allows, e.g. frequency converters for heat dissipation to be installed in a divider panel with the cooling units facing outwards and protected/finished off with a cover.
IP protection category to IEC 60 529
IP 54
Packs of
1 pc(s).
Weight/pack
9 kg
Customs tariff number
94039910
EAN
4028177208735
ETIM 7.0
EC002525
ECLASS 8.0
27182102
Product description
TS Divider panel, for TS, for WD: 2000x400 mm
Dokumentacija
Instructions