The Wire Terminal WT L5 T fully automated wire processing machine can process wire cross-sections ranging from 0.5–2.5 mm². This includes length-cutting, insulation-stripping, crimping and project-specific labelling of the wires. The pre-assembled wires are made available by the Wire Handling System (WHS). The WHS is a fully automated wire distribution system. Wires that have been manufactured just-in-time in the Wire Terminal WT are delivered sequentially to a maximum of four wiring workstations using compressed air.
- Articolul nr.:
- AS 4051192
- Design
- Wire Terminal WT L5 T (Wire Handling System)
- Product description
- The Wire Terminal WT L5 T fully automated wire processing machine can process wire cross-sections ranging from 0.5–2.5 mm². This includes length-cutting, insulation-stripping, crimping and project-specific labelling of the wires. The pre-assembled wires are made available by the Wire Handling System (WHS). The WHS is a fully automated wire distribution system. Wires that have been manufactured just-in-time in the Wire Terminal WT are delivered sequentially to a maximum of four wiring workstations using compressed air.
- Benefits
- Wire manufacturing based on the just-in-time and just-in-sequence principles
- Save time and resources with automated wire infeed
- Step-by-step operative instructions with Eplan Smart Production
- Direct addressing helps to minimise errors in workstation commissioning
- Technical specifications
- 5 wire end ferrule infeeds via feeder bowls
- Crimping range 0.5 mm²: Crimping length 8 mm (0.31 in.) and 10 mm (0.39 in.)
- Crimping range 0.75 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.) and 12 mm (0.47 in.)
- Crimping range 1 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.) and 12 mm (0.47 in.)
- Crimping range 1.5 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.), 12 mm (0.47 in.) und 18 mm (0.71 in.)
- Crimping range 2.5 mm²: Crimping length 8 mm (0.31 in.), 12 mm (0.47 in.) and 18 mm (0.71 in.)
- Wire output via the integral Wire Handling System
- The Wire Terminal WT L can process wire lengths from 150 mm to 10 m
- The WT L Wire Terminal can accommodate one wire infeed block.
- Supply includes
- Machine frame and encapsulation
Operating unit
1 x WT 16 vibratory bowl feeder for 0.5 mm²
2 x WT 20 vibratory bowl feeders for 0.75/1.0 mm²
2 x WT 29 vibratory bowl feeders for 1.5/2.5 mm²
Wire distribution system for the wire handling system - Machinable material
- Fine-wire copper cables to EN 60228 / VDE 0295 Category 5
- Wire end ferrules with plastic collar to DIN 46228-4 and Multinorm
- Note
- Please talk to your Rittal sales consultant about a bespoke machine configuration.
- German and English are included as standard with the Wire Terminal
- The vibratory bowl feeders and the separation of single wire end ferrules are designed for the dimensional tolerances of Rittal wire end ferrules to DIN 46228-4:2019-02. If the wire end ferrules used exceed the defined dimension tolerances, it may be necessary to design/test a new bowl feeder and to adapt the wire end ferrule separation.
- We reserve the right to make technical modifications
- Machine options
- Wire store WT Tube 12 (4051.218)
- WT printer IQ.JET, black 4051281
- WT printer IQ.JET, white 4051280
- Interfaces
- Eplan Pro Panel
- Eplan Smart Wiring
- Compressed air supply min.
- 5,5 bar
- Compressed air supply max.
- 6 bar
- Rated operating voltage
- 230 V, 1~, 50 Hz/60 Hz
- Control voltage (DC)
- 24 V
- Power consumption (approx.)
- 1 kW
- Cycle time
- 11 s
- Wires per hour approx.
- 320
- Support area
- Width: 2,170 mm
Height: 1,870 mm
Depth: 1,080 mm - Customs tariff number
- 84633000
- ETIM 8
- EC000000
- ECLASS 8.0
- 18129090
- Product description
- Wire Terminal WT L5 T fully automated wire processing machine (wire feeder unit for the Wire Handling System)