Príslušenstvo pre montážne dosky

For additional clamping and to reduce potential vibration of the mounting plate.

Príslušenstvo pre montážne dosky

Fixácia montážnych dosiek Typ B, pre VX

For additional clamping and to reduce potential vibration of the mounting plate.

K produktom

Príslušenstvo pre montážne dosky

Fixácia montážnych dosiek Typ C, pre VX

For additional clamping and to reduce potential vibration of the mounting plate.

K produktom

Príslušenstvo pre montážne dosky

Multifunkčná montážna sada pre montážnu dosku VX

The mounting plate may be offset by a further 20 mm in the depth, and installed from the rear.

K produktom

Príslušenstvo pre montážne dosky

Fixácia montážnych dosiek pre TS, VX SE

For additional clamping and to reduce potential vibration of the mounting plate. Select according to mounting position, installation type and enclosure.

K produktom

Príslušenstvo pre montážne dosky

Montážna sada pre montážne dosky chrbtom k sebe

The minimum spacing between the mounting plates facilitates maximum assemblies on both mounting plates.

K produktom

Príslušenstvo pre montážne dosky

Klzná lišta pre montážnu dosku VX

For sliding the mounting plate in from the side.

K produktom

Príslušenstvo pre montážne dosky

Priečna vzpera pre montážne dosky pre VX, TS, VX SE

Additional horizontal rigidity for vibration damping and/or retrospective stabilisation of wide mounting plates. This brace may also be used as an attachment aid for heavy components.

K produktom

Príslušenstvo pre montážne dosky

Držiak delených montážnych dosiek pre delenú montážnu dosku VX

The partial mounting plate may be fitted set back by 20 mm behind the enclosure frame using the partial mounting plate holder, and also fastened to the frame from the outside. The partial mounting plate is also removable from the inside for servicing.

K produktom

Príslušenstvo pre montážne dosky

Súprava na upevnenie pántov dverí pre delenú montážnu dosku VX

In conjunction with the mounting kit for swing frames, small, the partial mounting plate can be hinged to allow access to the components behind it for servicing.

K produktom

Príslušenstvo pre montážne dosky

Montážna sada pre montážne dosky TS, SE umiestnené zadnými stranami k sebe

The minimal distance between the two mounting plates ensures a maximum installation depth for installed equipment on both sides.

K produktom

Príslušenstvo pre montážne dosky

Medzikus montážnej dosky pre VX, TS

For a continuous mounting surface in bayed suites where the mounting plate is set forward.

K produktom

Príslušenstvo pre montážne dosky

Transportná rukoväť pre montážne dosky pre VX, TS, VX SE

May be used at any given position in the side C-fold