Accessories for climate control

Filter technology

If the air has elevated levels of dust contamination, it is advisable to use filter mats to extend the service life of the fan-and-filter unit and guarantee the protection category. Metal filters are particularly recommended in environments with oily ambient air.

Filter technology

Filter mat for Blue e+ chillers (inverter housings)

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

Filter technology

Pleated filter for Blue e+ roof-mounted cooling unit and VX25 Blue e+ integration solution

The pleated filter is used to achieve protection category IP 54 with the roof-mounted cooling unit Blue e+ and the VX25 Blue e+ integration solution

Filter technology

Filter mat for tangential fans

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

Filter technology

Filter mat for cooling units, air/air heat exchangers and chillers

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

Filter technology

Metal filter

We recommend the use of washable metal filters, particularly in environments with dusty or oily ambient air. If air or steam condenses on the metal surfaces, any particles that may be present will adhere to the metal and are easily washed out with water...

Filter technology

Spare filter mat

For the stocking of filter mats for roof-mounted fans, fan-and-filter units and thermoelectric coolers in larger packet sizes.

Filter technology

Fine filter mat for fan-and-filter units

Combined with the standard filter and the additional fine filter mat, this achieves a higher protection category.

Filter technology

Outlet filter Standard

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

Filter technology

Outlet filter EMC

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

Filter technology

Hose-proof hood to increase the protection category

Particularly for applications in the food industry, the hose-proof hood prevents the ingress of damp. The protection category IP 56 is achieved in conjunction with a standard filter.

Filter technology

Blanking cover for fan-and-filter units / outlet filters

If you need to close existing mounting cut-outs for fan-and-filter units/outlet filters in order to achieve a higher protection category, a blanking cover may be used in the fan-and-filter unit / outlet filter instead of the filter mat, without the need...

Filter technology

Front outlet grille 2 U for tangential fans

Front outlet grille 2 U for tangential fans to expel the hot air to the outside from the upper section of the enclosure. Two grilles may be used for natural convection.

Filter technology

Filter holder for roof ventilation

A filter mat must be used to increase the protection category of the roof ventilation SK 3148.007.

Filter technology

Enclosure internal fan

To prevent hot-spots inside the enclosure and support the air routing of active enclosure climate control components.

Filter technology

Mini fan

Compact DC fan for enclosure and component cooling in enclosures.

Filter technology

Integrated louvres

For ventilation by convection, easily retro-fitted using 4 screws.