RiLineX connection adaptor

Št. artikla: RX 9361315

RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.

Št. artikla:
RX 9361315
Prednosti
Mounting on the busbar system and cable connection with just one screw
Material
Poliamid (PA 6)
Protipožarna zaščita v skladu z UL 94
Barva
RAL 9005
Nazivni tok (maks.)
864 A
Maks. nazivni tok
1.060 A
Rated current of round conductor
1.060 A
Rated current of round conductor (UL)
980 A
Električne nazivne vrednosti UL (SCCR)
27,5 kA - 600 V, RMS, unprotected
100 kA - 600 V, circuit breaker max. 600 A, DIVQ/7
100 kA - 600 V, Fuse Class L max. 2000 A, JDDZ/7
Kabelska vtičnica
Top/bottom
Za sisteme palic z razmakom med središči
60 mm
Število polov
Single-pole
Za namestitev sistema zbiralnih sponk
RiLineX
RiLine60
Mere
Širina: 54,1 mm
Višina: 119,4 mm
Globina: 163,4 mm
Priklop okroglih vodnikov
95 ‐ 300 mm²
Za namestitev zbiralnih sponk
15 x 10 mm
20 x 10 mm
30 x 10 mm
Rated voltage
1.000 V AC
1.500 V DC
600 V AC (UL)
600 V DC (UL)
Kategorija prenapetosti
4
Stopnja kontaminacije
3
Standardi
IEC/EN 61439-1
UL 508
Nazivna impulzna vzdržna napetost Uimp
12 kV
Rated insulation voltage Ui
1.000 V
Izguba toplote maks.
105 W
IP razred zaščite po IEC 60 529
IP 2X
Maximum operating air humidity
90 %
Delovno temperaturno območje
-5 °C...55 °C
Temperaturno območje shranjevanja
-25 °C...75 °C
Vlažnost okolice (brez kondenzacije)
10...90 %
Število povezav
2
Paketi
1 pc(s).
Neto teža
0,8 kg
Bruto teža
0,892 kg
PCF na paket (od zibelke do vrat)
4,47
Carinska tarifna številka
85369010
ETIM 9
EC001531
Opis izdelka
RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.
Odobritve
UL + C-UL (listed)
Izjave
Declaration of conformity
PCF-declaration
Dokumentacija
Quick guide
Safety instructions