- Številka izdelka:
- DK 7111.224
- Product description
- For structured routing of entire cable bundles, the cable bars may be secured to a variety of different positions inside the enclosure.
- Applications
- For horizontal cable routing within the distributor level. Thanks to their open mounting holes, they can also be retrospectively slotted onto the 482.6 mm (19") system punchings of the mounting level at any time and secured with the existing mounting screws of the installed components.
- Material
- Support: Sheet steel
Cable routing bars, connection combs: Plastic UL 94-V0 - Colour
- RAL 9005
- Supply includes
- Cable routing bars
Connection combs - Number connection combs
- 2
- Note
- Size of individual chambers (WxD) approx. 34 x 100 mm
- Units
- 4 U
- Packs of
- 4 pc(s).
- Net weight
- 0,6 kg
- Gross weight
- 0,727 kg
- PCF per pack (cradle-to-gate)
- 2.8 kg CO2 eq (Cat B)
- Note on PCF category
- Category B: PCF value (cradle-to-gate) based on the product weight, approximately calculated and self-declared
- Customs tariff number
- 73182900
- EAN
- 4028177550377
- ETIM 9
- EC000322
- ECLASS 8.0
- 27400604
- Product description
- DK Cable routing bars, 482.6 mm (19") attachment, 4 U
- Dokumentacija
- Instructions
Cable bracket for 482.6mm (19") system punchings, 4 U
4 U cable bracket element with 4 x 1 U single brackets
for horizontal cable guiding directly at the 482.6mm
(19") distribution level. The bracket elements allow
themselves to be slid back on the 482.6mm (19") system
punchings through their open mounting holes at any
time and to be fixed with the available securing
screws of the mounting components. An extension of
existing units through baying by means of connecting
piece is possible. For this the connecting piece is
put between two bracket elements and thus connects the
elements by forming an additional guide chamber
between the bracket elements. The connecting pieces
needed for baying are contained within the units.
delivery scope. The single bracket has a height of
approx one height unit (44.45 mm) and thus enables the
U related cable feed of whole cable bunches.
Each individual cable bracket can be opened
selectively and independently of the others and closed
again by means of a turning catch. It thus enables
straightforward structuring of the cabling and also
flexible change to it
Support element sheet steel, spray finished
Cable feed brackets, connecting pieces, turning
catches, plastic
4 U cable bracket element with 4 x 1 U single brackets
for horizontal cable guiding directly at the 482.6mm
(19") distribution level. The bracket elements allow
themselves to be slid back on the 482.6mm (19") system
punchings through their open mounting holes at any
time and to be fixed with the available securing
screws of the mounting components. An extension of
existing units through baying by means of connecting
piece is possible. For this the connecting piece is
put between two bracket elements and thus connects the
elements by forming an additional guide chamber
between the bracket elements. The connecting pieces
needed for baying are contained within the units.
delivery scope. The single bracket has a height of
approx one height unit (44.45 mm) and thus enables the
U related cable feed of whole cable bunches.
Each individual cable bracket can be opened
selectively and independently of the others and closed
again by means of a turning catch. It thus enables
straightforward structuring of the cabling and also
flexible change to it
Support element sheet steel, spray finished
Cable feed brackets, connecting pieces, turning
catches, plastic