Section for cable entry, centre for VX
Model No. VX 8618.803
The section is fitted directly onto the base opening and onto the enclosure frame. In this way, when installing the mounting plate in the rearmost mounting position, the cables may be routed directly onto a cable clamp rail without large bending radii. In conjunction with the cable clamp rail, this enables optimum adjustment between the cable entry and mounting plate.
+ Product description
High level of sealing of cables inserted into the enclosure
For top-mounting on gland plates.
Extruded aluminium section
Seal: PU foam
Cross-section: 30 x 25 mm
|Protection category IP to IEC 60 529:||
IP 55 if installed correctly
Plug-in sections, incl. foam rubber clamp strip
You will need two pieces per cable entry point.
From an enclosure width of 1000 mm, the base assembly is divided into two sections in the width. Two cable entry points (left/right) may be used.
Width: = 1200 mm
|Customs tariff number:||
VX Section for cable entry, centre, for W: 1200 mm
+ Add accessories
– Customers who were interested in this item were also interested in
Punched section with mounting flange, 14 x 39 mm for tubular door frame VX, TS, SE, AX
Model No.8619.720Punched section with mounting flange, 18 x 64 mm for VX
Model No.8617.030C rails 30/15 to EN 60 715 for VX, TS, SE
Model No.4947.000Baying enclosure system VX25 Basic enclosure
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.