Wishlist

Support section, height-adjustable for support arm systems

Model No. CP 6212.060

  Product Lifecycle  
Active
  • Support section, height-adjustable for support arm systems
  • Support section, height-adjustable for support arm systems
  • Support section, height-adjustable for support arm systems Anreih-Systeme TS 8
    Product description

    The new height-adjustable support section ensures that you always have a good view of the key parameters in human/machine interaction. The system can be fitted directly to the components in the CP 120 support arm system without any further adaptation on the wall side, and on the enclosure side on support arm system CP 60 or CP 120 depending on the model.

    The product was added to your wishlist

    Model No.:

     
     
     
     
     

    No. of packs*

    Add to wishlist

    * Pack of sale = 1 pc(s).

    + Product description

    Description: The new height-adjustable support section ensures that you always have a good view of the key parameters in human/machine interaction. The system can be fitted directly to the components in the CP 120 support arm system without any further adaptation on the wall side, and on the enclosure side on support arm system CP 60 or CP 120 depending on the model.
    Benefits: Support arm holds securely in any position
    Additional fixing with clamping lever if required
    Precise coordination to the suspended load via an adjusting screw at the front of the support section
    Adjusting screw can be accessed without dismantling any components
    Large cable tray and cable cable routing at the rotation points for safety
    Removable side panel for easy access to cable entry
    Tilting angle of the mounted enclosure is identical in every height position
    Cables with connectors such as DVI, VGA are easily inserted
    Broad weight range from 4 to 60 kg with three systems. (Weight range applies to configured enclosure and vertical support section.)
    Applications: For tall and short operators
    For seated and standing work
    Technical specifications: Cable tray: 36 x 11 mm (W x H), max. connector gland: 41 x 17 mm (W x H)
    Superior ergonomic design, thanks to adjustment range 600 mm (± 300 mm)
    Material: Joint parts: Cast aluminium
    Concertina section: Plastic
    General colour: RAL 7035
    Colour: RAL 7035
    Protection category IP to IEC 60 529: IP 54
    Supply includes: Assembly parts
    Note: In combination with support support section, height adjustable observe: When using an intermediate hinge, the height-adjustable support section should always be inserted in the closest horizontal position to the enclosure.
    Maximum cross-section for cable entry 41 x 17 mm
    Note on Model No.: Weight range applies to configured enclosure and vertical support section.
    Length: 741 mm
    Wall/machine side: CP 120
    Enclosure side: CP 60
    Weight range: 4 kg...30 kg
    Packs of: 1 pc(s).
    Weight/pack: 11.8 kg
    EAN: 4028177924338
    Customs tariff number: 73269060
    ETIM 7.0: EC000882
    ETIM 6.0: EC000882
    eCl@ss 8.0/8.1: 27400556
    eCl@ss 6.0/6.1: 27189261
    Product description: CP support section height-adjustable, CP 120/60, for weight range 4-30 kg

    + Downloads

    Data sheets:
    Technical details:  
    DE   EN   PL  
    Documentation:
    Further information:  
    DE   EN   ZH  
    Instructions: 
    (FR, EN, DE)

    + Add accessories


     
     
     
     
     
     
     

     Support section, height-adjustable for support arm systems

    Model No. CP 6212.060

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close