TS punched sections without mounting flanges, 45 x 88 mm
Model No. TS 8612.650
Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine.
+ Product description
for the inner mounting level
Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine. The twin profile with 11 rows of holes offers numerous additional opportunities for interior installation.
Enclosure type: the inner mounting level
Width/depth: 500 mm
On the vertical and horizontal TS, SE enclosure section
|Customs tariff number:||
TS TS punched section without mounting flange, 45 x 88 mm, for inner mounting level: for WD: 500 mm
+ Add accessories
– Customers who were interested in this item were also interested in
TS punched rail 25 x 38 mm
Model No.8612.750Punched rail 23 x 23 mm for TS, SE
Model No.4175.000Baying clamp, horizontal for back-to-back mounting
Model No.8800.170TS adaptor for wiring systems Adaptor rail for the Lütze LSC wiring system.
Model No.8800.160PS punched section without mounting flange, 23 x 73 mm for TS, SE
Model No.4375.000PS punched section without mounting flange, 23 x 73 mm for TS, SE
Model No.4381.000Trim panel, hinged at the top for VX
Model No.8620.502Divider panel for module plates for TS
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.