Brush strip, super-airtight
Model No. DK 7825.375
The special brush strips may be used to create airtight entries for cable sections and conductors.
+ Product description
For individual installation of enclosure panels, gland plates and panels. Cut-outs for cable routing at any position in the side panel, rear panel, doors, roof and base plate. These special brush strips may be used to create airtight entries for cable sections and conductors. The brush strips arranged in an offset configuration ensure good sealing from the routed cables even with large quantities of cables. In this way, unwanted flow losses may be reduced to a minimum.
Brush strip: Plastic, UL 94-HB
1 brush strip each, 1 m in length, right-hand and left-hand version
Length: 1 m
|For metal thicknesses:||
1,5 mm - 2 mm
|Customs tariff number:||
DK Brush strip, super-airtight, Bristle length: 58 mm, 2 pcs. L: 1 m, right-hand and left-hand version, Plastic to UL 94-V0
– Customers who were interested in this item were also interested in
Levelling feet for VX, VX IT, TS, TS IT, SE, PC, IW, Blue e+ chillers
Model No.4612.000Profile half-cylinders for handle systems
Model No.2468.000Brush strip
Model No.7072.200Profile half-cylinders for handle systems
Model No.9785.040Energy-box, 482.6 mm (19") Pull-out
Model No.7480.300Base/plinth adaptor for twin castors and levelling feet
Model No.8100.770Adaptor sections, 482.6 mm (19") for VX, VX SE
Model No.8619.300Base mounting plate for base/plinth VX and AX and base/plinth, complete
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.