Wire terminal accessories
-
Cleaning station
The cleaning station is a special unit for cleaning the print heads of the Wire Terminal WT.
-
Transport seal for wire rail magazine
Transport seal for securing the wire rail magazines of the Wire Terminal WT 36
-
Vibrofeeder pot WT
The fully automated wire cabling machine Wire Terminal WT C is supplied with wire end ferrules via vibrofeeder pots. The vibrofeeder pots process loose wire end ferrules with plastic collars. The feeding of the respective vibrofeeder pot into the working step of the Wire Terminal is fully automatic.
-
Bundle tape WT
Bundle tape for fully automated wire cabling machine Wire Terminal WT C for wire output as sequential chain bundle.
-
Wire rail fastener WT
The WT wire rails can be closed on both sides with the wire rail locks to prevent transportation and tampering.
-
Wire rail WT
The fully automated wire cabling machine Wire Terminal WT C can optionally be equipped with a separate wire rail system. The ready-cabled wires are placed on the relevant wire rails as specified in the correct sequence in the job orders. The front and back of the rails can then be secured with a locking system.
-
Guide hose for wire store WT
For guiding the wires from the wire storage unit to the wire terminal. The guide hose prevents access to the machine area from the outside. The hose can be used for individual wire feeding into the Wire Terminal or as a replacement material for the WT Tube 12 wire store.