CP 120 Support Arm System
-
Support section CP 120 Solid
Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any length, no thread-tapping required. Closed cable duct with a large cross-section.
-
Support section CP 120 open
Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via cover profile. X-shaped profiling for greater load capacity, large cable routing channels. Upper channel suitable for cables with large connectors (e.g. DVI or VGA) and available/usable throughout the entire system.
-
Support section CP 60 Solid
Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.
-
Support section CP 60 open
Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via cover profile. With tension elements for a high load capacity.
-
Support Profile, Height-Adjustable for support arm systems
The new height-adjustable support section always provides the right view of the key parameters in human/machine interaction. The system can be fitted directly to the components of the CP 120 support arm system on the wall side, and to either the CP 60 or CP 120 support arm system on the enclosure side, depending on the model.
-
Attachment CP 120 for support arm connection Ø 130 mm
For rigid fastening of the housing to the 120 support arm system
-
Adaptor support arm connection Ø 130 mm to 120 x 65 mm
For external mounting of command panels with 120 x 65mm support arm cutout and VESA 75/100 connection console
-
Adaptor for Siemens Pro-Panel
For external mounting of Siemens Simatic to the CP-40 support arm system, steel or CP 60/120 system with 120 x 65 mm support arm connection.
-
Coupling CP 120 for support arm connection Ø 130 mm
For swivel mounting the housing on the vertical section of the 120 support arm system
-
Angle coupling 90° CP 120 for support arm connection Ø 130 mm
For swivel mounting of the housing on the horizontal part of the support arm system. Housing may be suspended or top-mounted. Removable cover for easy cable routing.
-
Adaptor from support arm connection Ø 180 mm to Ø 130 mm
Mounted between housing and coupling or attachment or pivot.
-
Top-mounted joint CP 120 Vertical outlet
For swivel mounting of the support arm system on a horizontal surface – also suitable for ceiling mounting.
-
Top-mounted joint CP 120 Horizontal outlet
For swivel mounting of the support arm system on a horizontal surface – also suitable for ceiling mounting. Removable cover for easy cable routing.
-
Wall/base mounting bracket CP 120, large
For stable attachment of the support arm system to a vertical or horizontal surface.
-
Wall/base mounting bracket CP 120, small
For rigid attachment of the support arm system to a vertical or horizontal surface.
-
Wall-mounted hinge CP 120 Horizontal outlet
For swivel mounting of the support arm on vertical surfaces. Removable cover for easy cable routing.
-
Wall-mounted hinge CP 120 Horizontal outlet, without height offset
For swivel mounting of the support arm on a vertical surface.
-
Wall-mounted hinge CP 120 Vertical outlet
For swivel mounting of the support arm on vertical surfaces. Removable cover for easy cable routing.
-
Angle piece 90° CP 120
To connect horizontal and vertical support arm components. Removable cover for easy cable routing.
-
Intermediate hinge CP 120 without height offset
For pivoted connection of horizontal support profiles within the support arm system.
-
Intermediate hinge CP 120
For pivoted connection of horizontal support profiles within the support arm system. Removable cover for easy cable routing.
-
Connection console for support arm connection 120 x 65 mm
For rear connection of slimline command panels. Removable cover for simple cable routing