Punched sections:
-
Punched section with mounting flange, 14 x 39 mm for VX, VX SE, PC, IW, AX
For securing cable ducts, cable conduit holders, equipment installed on the door, etc.
-
Punched section with mounting flange, 18 x 64 mm for VX
For variable, individual interior installation of the enclosure frame on the outer mounting level.
-
Punched section with mounting flange, 23 x 64 mm for VX, VX IT, VX SE, AX plastic
For variable, individual interior installation of the enclosure frame on the inner mounting level, and for installation in compact enclosures.
-
Punched section without mounting flange, 23 x 64 mm for VX, VX SE
For variable, individual interior installation of the enclosure frame on the inner mounting level.
-
Punched section with mounting flange, 23 x 89 mm, stainless steel for VX, VX SE
For variable, individual interior installation of the enclosure frame on the inner mounting level.
-
TS punched section with mounting flange, 17 x 73 mm
For universal skeleton structures or partial assembly. Simply locate into the punchings and secure.
-
TS punched section with mounting flange, 23 x 73 mm
The alternative to the TS punched section with mounting flange 17 x 73 mm, with punchings for captive nuts/threaded blocks instead of the slotted holes top and bottom. Simply locate and secure.
-
TS punched sections without mounting flanges, 45 x 88 mm
Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine.
-
PS punched section without mounting flange, 23 x 73 mm for TS, VX SE
For mounting on the horizontal and vertical enclosure sections of a TS via support bracket PS.
-
PS punched section with mounting flange 23 x 73 mm for TS, VX SE
For direct mounting on the horizontal enclosure sections of a TS. Only suitable for mounting to the vertical enclosure sections in conjunction with an adaptor. Simply locate into the TS punchings and secure.